CW6180/100(2T)
Swing over bed:800/1000mm Max.turning dia:480/680mm Max weight of workpiece :2000kg Max.length of workpiece:1500-6000mm Pan of guideway :600mm Spindle bore :100/140mm(optional) Range of spindle speeds :6-750r/min Main motor power :1
There lathes are suitable mainly for turning internal and external cylindrical, Conical and other swing surfaces as well as various metric, inch, module and diametric pitch threads. They are can also be used for broaching oil grooves and keyways. 1. The side wall of bed is constructed with double-rip plates. And the shape of internal ribs is of box type and bevel ribs combination. The rigidity is higher than that of ordinary lathes. The precision is stable. And these lathes can carry out strong force cutting. 2. On apron, there is a device, operated by a single level, used for rapid traverse of the carriage. Spindle’s braking and rotating direction change is controlled by hydraulic system, or by hand operation, all to user’s choice. 3. The saddle guide way is glued by “TSF” soft belt wear resisting materials. 4. On user’s demand, we can equip the lathe with automatic feeding mechanism. The top slide can be used independently for turning of short cone. In combination with longitudinal feeding, it can also turn long taper surface.
| ITEM | Unit | CW6180 | CW61100 |
| CAPACITIES | |||
| Swing over bed | mm | 800 | 1000 |
| Swing over carriage | mm | 480 | 680 |
| Max.length of workpiece | mm | 1500 2000 3000 4000 5000 6000 | |
| Max.turning length | mm | 1350 1850 2850 3850 4850 5850 | |
| Pan of guideway | mm | 600 | |
| Max.weight of workpiece | Kg | 2000 | |
| SPINDLE | |||
| Spindle nose | mm | C11(C15 optional) | |
| Spindle bore | mm | 100(140 optional) | |
| Taper hole of spindle | 1:20 | ||
| Range of spindle speeds | r/min | forward：6~750 reverse：10~775 | |
| No.of spindle speeds | forward：18;reverse：6 | ||
| FEED | |||
| Longitudinal and cross | 64；0.1~24.32 | ||
| Cross/long longitudinal feed | 1/2 | ||
| Screw pitch of leadscrew | mm | 12 | |
| No. and range of metric thread | 50 ;1~240 | ||
| No. and range of inch thread | 26;14~1 | ||
| No. and range of module thread | 53;0.5~120 | ||
| No. and range of dia. thread | 24;28~1 | ||
| TURRET | |||
| Distance of centerline and tool resting plane | mm | 33 | |
| Tool post swing range | ° | ±90° | |
| Max.travel of cross slide | mm | 500 | |
| Max.travel of top slide | mm | 200 | |
| Section of tool shank | mm | 32（202×202） | |
| TAILSTOCK | |||
| Dia. of tailstock | mm | 100 | |
| Travel of tailstock quill | mm | 250 | |
| Taper hole of tailstock quill | morse 6# | ||
| OTHERS | |||
| Main motor power | Kw | 11 | |
| Length | mm | 3670 3985 5165 6220 7400 8260 | |
| Width | mm | 1730 | |
| Height | mm | 1450 | |
Standard and Optional list
| Item | Standard | Optional |
| Chuck | 400mm 3-jaw manual | 500MM 3-jaw,400MM 4-jaw,500mm 4-jaw,630mm 4-jaw |
| follower rest | 20-130mm | |
| Steady rest | 40-350mm | 260-450mm |
| Tailstock | Manual | |
| X/Z axis DRO | SINO or Other brand |
