CW61100B/125B/140B/160B(6-8T)
Swing Over bed:1000,1250,1600MM; Max.length of workpiece:1500-12000MM; Max.Weigth of workpiece:6-8Tons; Swing over carriage:615-1250MM; Pan of guideway:755MM;
CW61100B CW61125BCW61160B parallel lathes are for turning of cast iron and steel workpieces, turning of non-ferrous metal parts of big or medium sizes. It can do external cylindrical surface turning, inner hole and end face turning. It can also turn various intemal and external metric, inch, module and diametrical pitch threads, the top slide can be used independenthy for turning of short taper. These lathes are of high power, high rigidity and wide rotating speed range, so it can be used for high speed and strong force turning.
| ITEM | Unit | CW61100B | CW61125B | CW61140B | CW61160B |
| CAPACITIES | |||||
| Swing over bed | mm | 1000 | 1250 | 1400 | 1640 |
| Swing over carriage | mm | 615 | 865 | 1015 | 1250 |
| Max.length of workpiece | mm | 1500 2000 3000 4000 5000 6000 8000 10000 12000 | |||
| Max.turning length | mm | 1300 1800 2800 3800 4800 5800 7800 9800 11800 | |||
| Pan of guideway | mm | 755 | |||
| Max.weight of workpiece | Kg | 6000(optional:8000) | |||
| SPINDLE | |||||
| Spindle nose | mm | A2-15(8×M22) | |||
| Spindle bore | mm | 130 | |||
| Taper hole of spindle | 1:20/140 | ||||
| Range of spindle speeds | r/min | forward：3.15~315; reverse：3.5~291 | |||
| No.of spindle speeds | forward：21;reverse：12 | ||||
| FEED | |||||
| No.of Longitudinal and cross | 56/56 | ||||
| Feed per revolution | mm | Longitudinal：0.1~12;cross:0.05~6;top slide:0.025~3 | |||
| No. and range of metric thread | 44;1~120mm | ||||
| No. and range of inch thread | 31;28~1/4 | ||||
| No. and range of module thread | 45;0.5~60mm | ||||
| No. and range of dia. thread | 38;1/2~56DP | ||||
| TURRET | |||||
| Distance of centerline and tool resting plane | mm | 48 | |||
| Tool post swing range | ° | ±90° | |||
| Max.travel of cross slide | mm | 520(20″) | 580 | 580 | 630 |
| Max.travel of top slide | mm | 300 | |||
| Section of tool shank | mm | 45(260×260) | |||
| Rapid travel speeds | mm/min | Longitudinal:3740;cross:1870;Little slide:935 | |||
| TAILSTOCK | |||||
| Dia. of tailstock | mm | 160(6″) | |||
| Travel of tailstock quill | mm | 300(12″) | |||
| Taper hole of tailstock quill | morse 6# | ||||
| OTHERS | |||||
| Main motor power | Kw | 22 | |||
| Length | mm | 4600 5100 6100 7100 8100 9100 11100 13100 15100 | |||
| Width | mm | 2150 | |||
| Height | mm | 1700 1825 2150 | |||
Standard and Optional list
| Item | Standard | Optional |
| Chuck | 1000mm 4-jaw manual | 500MM 3-jaw,1250MM 4-jaw,1400mm 4-jaw |
| follower rest | 50-220mm | |
| Steady rest | 50-470mm | 550-635mm |
| Tailstock | Manual | Electric |
| X/Z axis DRO | SINO or Other brand |
